B3703 ENHANCED WORK LIGHT
GENERAL DESCRIPTION: The B3703 Enhanced Work
Light is a rugged, portable, high efficiency, fluorescent work light with the light output
of three conventional (4 ft) fluorescent work lights. Wherever good work lighting is
needed to insure safety and quality workmanship, the B3703 can reduce the man-hours and
downtime required to install work lights.
HIGH LIGHT OUTPUT: Puts out 3 times the light of a conventional single
(4 ft.) lamp fluorescent work light (and costs less than the light it
replaces).
HIGH EFFICIENCY: The B3703 achieves nearly twice the energy
efficiency of conventional fluorescent work lights by using a 100% solid state ballast
combined with high efficiency bulbs (with better light quality). When replacing
incandescent work lights, the B3703 will pay for itself in energy savings within 2 to 4
years.
PORTABLE: The B3703 weighs less than a conventional single (4 ft.) bulb unit.
RUGGED: The light uses a tough aluminum frame and is encased in a virtually
indestructible polycarbonate shell (aircraft window plastic). Synthetic rubber end caps
absorb shocks and protect switch and cord from damage. Lamps are locked in place with
spring loading at both ends (eliminates loose and broken bulbs).
ERGONOMIC: The lights can be plugged together to form a string of lights, and in
addition, each light comes with a choice of fully adjustable snap-buckle or Velcro
strapping for rapid setup. Opens easily for lamp changes.
HIGH EFFICIENCY: The B3703 achieves nearly twice the energy
efficiency of conventional fluorescent work lights by using a 100% solid state ballast
combined with high efficiency bulbs (with better light quality). When replacing
incandescent work lights, the B3703 will pay for itself in energy savings within 2 to 4
years.
PORTABLE: The B3703 weighs less than a conventional single (4 ft.) bulb unit.
RUGGED: The light uses a tough aluminum frame and is encased in a virtually
indestructible polycarbonate shell (aircraft window plastic). Synthetic rubber end caps
absorb shocks and protect switch and cord from damage. Lamps are locked in place with
spring loading at both ends (eliminates loose and broken bulbs).
ERGONOMIC: The lights can be plugged together to form a string of lights, and in
addition, each light comes with a choice of fully adjustable snap-buckle or Velcro
strapping for rapid setup. Opens easily for lamp changes.
SPECIFICATIONS:
| LIGHT OUTPUT: |
6,900 LUMEN NET 9,000"Total
Initial Lumen" (sum of bulb ratings) other brands use this method |
| BULBS: |
(4) 3 FT. FLUORESCENT LAMPS WITH 20,000 HRS
LAMP LIFE, >80 CRI |
| BALLAST: (flicker free) |
100% SOLID STATE, HIGH POWER FACTOR
(>.99), CLASS P, >20 KHZ |
| VOLTS: |
Universal
Volt, 120 to 277 VOLT 50/60
HZ (automatically adjusts to any Volt/Hz) |
| AMP: |
0.75 AMP (@ 120 VOLT) TO 0.3 AMP (@ 277 VOLT) |
| TYPICAL WATT: |
75 WATTS |
| MIN. START TEMP. |
STARTS BELOW 0 DEG
F. (BELOW -20 DEG C) |
| WEIGHT: |
10 LBS w/out cord, 11 LBS w/ 6 ft cord |
| LENGTH: |
4.5 FT. |
| DIAMETER: |
4 INCH SHELL, 5 INCH END CAPS |
| CORD: |
6 FT. SJOOW-A CORD WITH WATER/DUST TIGHT
PLUG & RECEPTACLE |
| UL LISTED FOR WET LOCATIONS |
LIGHT BODY AND ALL EXTERIOR ELECTRICAL
PARTS ARE SEALED & WATERPROOF |
ATS LIGHTING INC. |
CONCORD, MA |
TEL.: (978) 369-9901 |
MADE IN THE USA |
PATENT # 5,493,482 |
|
ATS LIGHTING INC. Bright work lights, portable temporary
lighting, compact fluorescent work lights, waterproof feed through string lighting
systems, rough service water resistant multiple lamp utility trouble worklights for
construction, safety lighting, aircraft aerospace manufacturing, mining tunneling, tents,
airplane, ship submarine building, sea oil rig platforms